Products

DescriptionClutch Plate Kit for Rivera Pro ClutchProvides a large increase in clutch plate surface for getting the horsepower to the rear wheelIncl...

Description5-Speed Mainshaft ComponentSold individually, unless noted.DetailsProduct Name : GearStyle : Chain Drive| Standard RatioTooth Count : 32...

Description5-Speed Countershaft ComponentSold individually, unless noted.DetailsStyle : Standard RatioType : Fifth GearTransmission Type : 5 SpeedP...

Description5-Speed MainshaftSold individually, unless noted.DetailsUnits : EachStyle : 5 Speed| Chain DriveProduct Name : MainshaftType : Transmiss...

Description5-Speed Gear SetGears are made from high-nickel alloy steel that is heat-treated and shot-peened for maximum durability and strengthSet ...

Description7 Grind CamGreat street cam, especially for 84/88-inch strokers with maximum torque from 2,200 to 6,500 rpmUpgraded version of the origi...

DescriptionA2 Grind CamCam bolts into 66-84 (except 80-81) Big Twin engines with no head work; on 80-81 engines the height of the stock H-D valve ...

DescriptionB2 Grind CamMore mid-range and high-end power for street/strip with smooth idle; best cam for 74/80 inchers and small strokersSpring spa...

DescriptionCam Drive GearHigh-quality heat-treated gearsMade in the U.S.A.DetailsUnits : EachProduct Name : Drive GearDiameter : 2,7324"Size : Unde...

DescriptionCam Drive GearHigh-quality heat-treated gearsMade in the U.S.A.DetailsSize : StandardProduct Name : Drive GearType : CamshaftDiameter : ...

DescriptionCam Drive GearHigh-quality heat-treated gearsMade in the U.S.A.DetailsProduct Name : Drive GearSize : Undersize (-0,003")Diameter : 2,73...

DescriptionGrind CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatMade in the U.S.A.For mild street...

DescriptionGrind CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatMade in the U.S.A.Bolt-in street ...

DescriptionGrind CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatMade in the U.S.A.Most are bolt-i...

DescriptionGrind CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatMade in the U.S.A.Strokers from 8...

DescriptionHigh-Lift Upper Spring CollarsCams with .600 lift can easily be accommodated when used with high-lift springsMade from T-6 aluminum, col...

DescriptionHigh-Lift Valve SpringsProvide correct spring force for any of our performance cams when used in 74" and 80" motorsMax lift; installatio...

DescriptionLow-Compression CamDesigned with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output th...

DescriptionLow-Compression CamDesigned with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output th...

DescriptionMedium-Lift Upper Spring Collar SetIntended to work with stock springs and add approximately .060" spring travel with no other modificat...

DescriptionReplacement Pushrod KitPushrods fit Shovel engines using stock diameter tubing so there is no cover tube interferenceFor stock stroke ap...

DescriptionReplacement Pushrod KitPushrods fit Shovel engines using stock diameter tubing so there is no cover tube interferenceFor stock stroke ap...

DescriptionValve Spring Upper CollarsSimilar to stock 80-style parts, but lower profile for easier installation of higher lift camsRequired parts i...

DescriptionBlack Vinyl Throttle/Idle CableCables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an i...