Products

DescriptionJIMS, crankcase lap toolDetailsUsed to lap pinion bearing race in the right crankcase. Removes more material in less time but with great...

DescriptionJIMS, crankcase splitter & flywheel removal toolDetailsUsed to split engine cases and easily break the sealer, without damage. Will ...

DescriptionJIMS, CRANKCASE SPLITTER TOOLDetailsUsed to split crankcases easily by 'breaking' the sealant by gently pushing apart both case halves. ...

DescriptionJIMS, crankpin 54-E81 XL. STDDetailsStandard O.D. 1.250". 3-hole oiling design. Use JIMS 978253 crankpin nuts. Use 517950 (Repl. 23985-1...

DescriptionJIMS, crankpin nut setDetails1"-20 threaded. Repl. 23969-83 and 23981-98.L81-99 B.T. (excl. Twin Cam).; All S&S Evo B.T. style crank...

DescriptionJIMS, CRANKPIN NUTSDetails7/8"-18 threaded. Repl. 23967-41 (366-41).41-53 B.T. (excl. Flatheads)

DescriptionJIMS, crankshaft bearing toolDetailsRemoves & installs the right (sprocket shaft) side crankshaft bearing on Twin Cam A engines (Dyn...

DescriptionJIMS, cylinder drill jig assemblyDetailsUsed to drill-out stripped cylinder stud threads, up to 4" bore, in the crankcases. This tool wi...

DescriptionJIMS, cylinder head holder toolDetailsWith 10mm & 12mm threaded ends; holds cylinder head firmly in a vice to aid in servicing / ove...

DescriptionJIMS, cylinder head holder toolDetailsWith 12 & 14mm threaded ends; holds cylinder head firmly in a vice to aid in servicing / overh...

DescriptionJIMS, cylinder hold down nutsDetailsBlue anodized. Holds cylinders down when heads are removed, so crankshaft can be rotated for tuning ...

DescriptionJims, cylinder torque plate kitDetailsCompatible with stock 107" (3.937") to 114" (4.016") and 117" (4.075") cylinder bores with OEM bol...

DescriptionJIMS, cylinder torque platesDetailsUsed with stock 3.75" (3-3/4") to 3.875" (3-7/8") inch bore cyl. with OEM bolt pattern. Used to measu...

DescriptionJIMS, DENTAL PICKDetailsWith a 90° pick on one end and a contoured grip. 30-34 Rockwell hardened 24 series stainless. With a 90° pick on...

DescriptionJIMS, dowel pin. Case to case & case to cylinderDetails84-99B.T.: cyl to case 79-21 XL; 08-12XR1200: case to case (2 used) 86-21 X...

DescriptionJIMS, dual gauge leak down testerDetailsFor 4-stroke engines; For14 & 18mm spark plug threads; incl. 12mm & 10mm adaptersUniv.

DescriptionJIMS, Dyna ignition switch & fork lock toolDetailsUsed to remove and install the ignition switch/fork lock. This tool locates on the...

DescriptionJIMS, EFI fuel pressure test gauge kitDetailsUsed to test correct pressure of the fuel pump of bikes with Delphi Electronic Fuel Injecti...

DescriptionJIMS, engine & transmission plug kitDetailsUsed instead of rags. Provides enough plugs to fully seal all Twin Cam and transmission h...

DescriptionJIMS, engine cradle for 36-99 B.T.DetailsBlue; Steel; Used with 978395 base stand; For 36-99 single cam H-D engines36-99 B.T. (excl. Twi...

DescriptionJIMS, engine cradle for SportsterDetailsBlue; Steel; Use with 978395 base stand; Will not take 04-up rubber mounted engines57-03 Sportst...

DescriptionJIMS, engine cradle for Twin Cam ADetailsuse with 978395 base stand99-17 Dyna; 99-16 FLT/Touring

DescriptionJIMS, engine cradle for Twin Cam BDetailsBlue; Steel; Use with 978395 base stand00-17 TCB Softail

DescriptionJIMS, ENGINE ROTATOR TOOLDetailsUsed to rotate the assembled engine, fits to sprocket shaft, when doing pushrods or engine timing; With ...

DescriptionJIMS, engine standDetailsSteel stand with a tough powder coated finish. Takes the Twin Cam A engine (engine without balancers).99-17 Dyn...

DescriptionJIMS, engine stand Sportster/BuellDetailsSteel stand with a tough powder coated finish.57-03 Sportster; 94-02 Buell (excl. XB models)

DescriptionJIMS, engine stand Twin Cam BDetailsSteel stand with a tough powder coated finish.00-17 Softail

DescriptionJIMS, Evo Big Twin crankcase boring toolDetailsUsed to bore Evo Big Twin cases with stock cyl. stud pattern up to 3.8125" spigot diamete...

DescriptionJIMS, Evo B.T. Pro-Lite Worksavers aluminum pushrod setDetailsQuick installs without removing rocker covers. Manufactured from blue anod...

DescriptionJIMS, Evo compression release valve toolDetailsDrill fixture tool. Used to machine Twin Cam heads so heads will accept the JIMS mechanic...

DescriptionJIMS, exhaust gasket installer toolDetailsBlue anodized aluminum. Used to install exhaust gaskets straight and without distortion.84-21 ...

DescriptionJIMS, exhaust pipe retaining ring install toolDetailsNo more wrestling exhaust pipe retaining rings. This tool is designed to install th...

DescriptionJIMS, exhaust stud drill plateDetailsTool used to completely drill out a broken exhaust stud. Compatible with all Evo, Twin Cam and M8 m...

DescriptionJIMS, EXTERNAL LOCK RING PLIERSDetailsUsed to install & remove snap rings (retaining rings) MCS 500975 / OEM 11067. Jaws are scored ...

DescriptionJIMS, Extra Grip tool driver spacerDetailsOptional for use with all JIMS 2-piece bearing race tools; Applies outwards force for better t...