Products

DescriptionMOTION PRO T-CONNECTOR 5/16 INCHDetailsMulti purpose fuel & oil line T fittings

DescriptionMotion Pro, throttle cable clips. Throttle (pull)DetailsFor the throttle (pull) side. Stock replacement throttle cable clips. Used to fa...

DescriptionMotion Pro, throttle cable clips. Idle sideDetailsFor the idle (push) side. Stock replacement throttle cable clips. Used to fasten the i...

DescriptionMOTION PRO THROTTLE/IDLE CABLE CLAMPDetailsBlack; For 4.7mm cables

DescriptionMOTION PRO THROTTLE/IDLE CABLE CLAMPDetailsChrome; for 4.7mm OD cables

DescriptionMOTION PRO Y-CONNECTOR 1/4 INCHDetailsMulti purpose fuel & oil line Y fittings

DescriptionMOTION PRO Y-CONNECTOR 3/16 INCHDetailsMulti purpose fuel & oil line Y fittings

DescriptionMOTION PRO Y-CONNECTOR 5/16 INCHDetailsMulti purpose fuel & oil line Y fittings.

DescriptionMotion Pro, 10" forged steel tire ironDetailsCold forged steel; Hard nickel pewter finish; Curved end; Weight 119 gram; Dimensions: 10" ...

DescriptionMotion Pro, 11-slot T-handle rackDetailsChrome plated steel. One-piece rack. Holds up to 11 T-handles. Will hang on the side of most too...

DescriptionMotion Pro, 5/16" O-clip hose clamps (3/16" hose)DetailsMulti purpose O-clip hose clamps of the 'Clamp & Click' type on vinyl, rubbe...

DescriptionMotion Pro, 7-piece T-handle set metricDetailsTools come with a durable nickel pewter finish. Includes a vinyl storage pouch. 7-piece ...

DescriptionMotion Pro, adjustable torque wrench adapterDetailsUsed to correctly torque fasteners that are otherwise not reachable with a torque wre...

DescriptionMotion Pro, allen (hex) head T-handle set metricDetails4-piece set. Dual drive, one on handle & one on shaft. Chrome vanadium steel....

DescriptionMotion Pro, Axis„¢ truing & balance standDetailsTruing stand for wheels; Can be used for static balancing; Comes with small 15mm axl...

DescriptionMotion Pro, ball bearing remover kit for wheelsDetailsSplit collet design; Used to remove ball bearings with 3/4" (19.05mm) and 1" (25.4...

DescriptionMotion Pro, ball bearing remover kit for wheelsDetailsSplit collet design; Used to remove ball bearings with 3/4" (19.05mm), 1" (25.4mm)...

DescriptionMotion Pro, ball-end allen head tool set metricDetailsChrome Vanadium steel. Includes 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm hex keys.

DescriptionMotion Pro, bearing driver kitDetailsFits 12-25 mm I.D. and 32-47 mm O.D. bearings. Universal kit with steel handle and anodized aluminu...

DescriptionMotion Pro, blind bearing removal kitDetailsComplete with collets to remove 8, 10, 12, 15, 17, 20, 25 and 30mm ID bearings, with the inc...

DescriptionMotion Pro, brake caliper piston toolDetailsAluminum; Blue anodized; Used to remove brake caliper pistons from monoblock calipers; Fits ...

DescriptionMotion Pro, cable lube toolDetailsUsed to inject lubricant into the cable housing of throttle, brake and clutch cables. Clamps over the ...

DescriptionMotion Pro, carburetor service toolDetailsWith a precision made high quality 90° gear drive. Great for the hard to reach areas we all kn...

DescriptionMotion Pro, chain breaker w/ folding handleDetailsFor 420 to 530 chains. Will push pin completely through link / side plate. Pin is heat...

DescriptionMotion Pro, chain breaker, press & rivet toolDetailsWorks with most 520, 525 and 530 chains, including O-ring. Breaks, presses and r...

DescriptionMotion Pro, chain brushDetailsDouble ended brush to get to the right spots quickly. The three sided brush aids in cleaning the chain and...

DescriptionMotion Pro, circlip master cylinder pliersDetailsUsed to remove & install internal snap rings / circlips / retaining rings in hydrau...

DescriptionMotion Pro, clear PVC vent hoseDetailsClear; 1/8" (3mm) ID; 1/4" (6mm) OD; 25 foot (7.62 meter) roll

DescriptionMotion Pro, clear PVC vent hoseDetailsClear; 3/16" (5mm) ID; 5/16" (8mm) OD; 25 foot (7.62 meter) roll

DescriptionMotion Pro, clear PVC vent hoseDetailsClear; 1/4" (6mm) ID; 7/16" (11mm) OD; 25 foot (7.62 meter) roll

DescriptionMotion Pro, clear PVC vent hoseDetailsClear; 5/16" (8mm) ID; 1/2" (12.5mm) OD; 25 foot (7.62 meter) roll

DescriptionMotion Pro, clear PVC vent hoseDetailsClear; 3/8" (10mm) ID; 9/16" (14mm) OD; 25 foot (7.62 meter) roll

DescriptionMotion Pro, clutch basket holding toolDetailsMedium carbon steel with hardened jaws; Used to hold clutch basket and final drive sprocket...

DescriptionMotion Pro, clutch hub nut toolDetailsAllows to remove & install clutch hub nut with 11/16" wrench; Opening in middle allows access ...

DescriptionMotion Pro, clutch spring toolDetailsUsed to release clutch spring for removal and installation of retaining ring. Includes adapter for ...

DescriptionMotion Pro, compression testerDetailsUsed to check dynamic cylinder pressure; Includes 10, 12, 14mm threaded hoses; With 300 psi gauge; ...

DescriptionMOTION PRO, CONTROL CABLE FERRULESDetailsConnects idle & throttle cable to throttle sleeve74-20 H-D with single or dual throttle cab...

DescriptionMotion Pro, control cable hanger setDetailsDurable & re-useable. No more hassle, no more torn paper headers or cables falling out of...

DescriptionMotion Pro, digital tire pressure gaugeDetailsDigital readout to 1/100th PSI up to 60 PSI (4.14 bar) maximum. Billet aluminum body with ...

DescriptionMotion Pro, Ergo spoke nipple wrench 5.0mmDetailsErgonomic handle with excellent grip & feel; With open and semi-closed ends; Open-e...

DescriptionMotion Pro, Ergo spoke nipple wrench 6.3mmDetails6.3mm is stock for H-D spokes; Ergonomic handle with excellent grip & feel; With op...

DescriptionMotion Pro, Ergo spoke nipple wrench 6.5mmDetailsErgonomic handle with excellent grip & feel; With open and semi-closed ends; Open-e...

DescriptionMotion Pro, Ergo spoke nipple wrench 6.8mmDetailsErgonomic handle with excellent grip & feel; With open and semi-closed ends; Open-e...

DescriptionMotion Pro, Ergo spoke nipple wrench 6mmDetailsErgonomic handle with excellent grip & feel; With open and semi-closed ends; Open-end...

DescriptionMotion Pro, Ergo spoke nipple wrench 7.0mmDetailsErgonomic handle with excellent grip & feel; With open and semi-closed ends; Open-e...

DescriptionMotion Pro, Ergo spoke nipple wrench setDetailsSet includes 6 individual wrenches; With open-end for quick adjustment; Closed-end is for...

DescriptionMotion Pro, EV1 fuel injector cleaner toolDetailsBillet aluminum construction; Incl. pigtail to servicer EV1 injectors; Will flush &...

DescriptionMotion Pro, EV1 fuel injector pigtailDetailsReplacement or optional for 547329 fuel injector cleaner toolFor H-D with EV1 injectors