Products

DescriptionMotion Pro, Pro Fill air chuck adapterDetailsNever easier to inflate hard to reach tire valves with the pivoting angled head design. Blu...

DescriptionMotion Pro, Pro Plug Socket„¢ 16mm spark plug socketDetails16mm socket, for most 10mm threaded spark plugs. Used with a 3/8" square driv...

DescriptionMotion Pro, Pro Plug Socket„¢ 18mm spark plug socketDetails18mm socket, for most 12mm threaded spark plugs. Used with a 3/8" square driv...

DescriptionMotion Pro, Pro Plug Socket„¢ 21mm spark plug socketDetails21mm socket, for most 14mm threaded spark plugs. Used with a 3/8" square driv...

DescriptionMotion Pro, pushrod cover toolDetailsUsed on multiple parts pushrod covers to prevent scratches36-21 B.T.; 57-90XL

DescriptionMotion Pro, rear chain alignment toolDetailsQuick and accurate alignment of chain/sprockets. Tool clamps in squarely to rear sprocket an...

DescriptionMotion Pro, repl. #2 and #3 Phillips bitsDetailsIncl. #2 & #3 Phillips bits. Replacement bits for 547069 multi-purpose tool and univ...

DescriptionMotion Pro, repl. 25mm wheel bearing removerDetailsReplacement 25mm remover as used in 547115 and 576560 wheel ball bearing remover kits

DescriptionMotion Pro, repl. 3/4" wheel bearing removerDetailsReplacement 3/4" remover as used in 547116, 547115 and 576560 wheel ball bearing remo...

DescriptionMotion Pro, repl. 5 and 6mm allen bitsDetailsIncl. 5 and 6mm allen (hex) bits. Replacement bits for 547069 multi-purpose tool and univer...

DescriptionMotion Pro, repl. straight-shot bitsDetailsIncl. two straight slot (screwdriver) bits. Replacement bits for 547069 multi-purpose tool ...

DescriptionMotion Pro, replacement driverDetailsReplacement driver for 547116, 547115 and 576560 ball bearing remover kits

DescriptionMotion Pro, replacement hose cutter bladesDetailsReplacement cutter blades for 547159 Motion Pro hose cutterUniv.

DescriptionMotion Pro, rim protector kitDetailsProtects wheels from tools when changing tires; Includes nylon retrival cord; Compatible with H-D ca...

DescriptionMotion Pro, Rimshield IIDetailsDurable nylon construction. Helps prevent rim damage during tire changes. Dual raised beads will allow ti...

DescriptionMotion Pro, Ringer fork seal driver 35-36mm forksDetailsFits 35/36mm fork tubes; Carbon steel with aluminum lock ring; Used to drive for...

DescriptionMotion Pro, Ringer fork seal driver 41mm forksDetailsFits 41mm fork tubes; Carbon steel with aluminum lock ring; Used to drive fork seal...

DescriptionMotion Pro, rocker cover bolt wrenchDetailsUsed to reach the 3/16" allen headbolts on Evo and Twin Cam type rocker covers.84-17Evo B.T.,...

DescriptionMotion Pro, single gauge leak down testerDetailsUsed to measure the amount of cylinder leakage in 4-stroke engines. Tests at 80 psi (5.5...

DescriptionMotion Pro, spark plug gapper/gauge toolDetailsWill check and adjust most spark plug gap sizes. Sizes include 0.5, 0.6, 0.7, 0.8, 0.9 an...

DescriptionMotion Pro, spinner T-handle 10"DetailsChrome plated chrome vanadium padded handle. Equipped with a free-turning blue anodized bearing m...

DescriptionMotion Pro, spinner T-handle 12"DetailsChrome plated chrome vanadium padded handle. Equipped with a free-turning blue anodized bearing m...

DescriptionMotion Pro, spoke nipple wrench 5.0 & 7.0mmDetailsChrome vanadium steel; Hard nickle pewter finish; Offset square-end openings for b...

DescriptionMotion Pro, spoke nipple wrench 6.0 & 6.3mmDetailsChrome vanadium steel; Hard nickle pewter finish; Offset square-end openings for b...

DescriptionMotion Pro, spoke nipple wrench 6.5 & 6.8mmDetailsChrome vanadium steel; Hard nickle pewter finish; Offset square-end openings for b...

DescriptionMotion Pro, spring hook, heavy dutyDetailsUsed to remove or install side stand (jiffy) springs, exhaust pipe springs, tank holding sprin...

DescriptionMotion Pro, Springer fork spring toolDetailsUsed to help assemble and disassemble Springer type front forks88-11 Softail FXSTS, FLSTS Sp...

DescriptionMotion Pro, steel tire iron setDetailsCold forged steel; Includes 15" (38cm), 11" (27cm) and 8.5" (21.5cm) curved tire ironsUniv.

DescriptionMotion Pro, SyncPro carb tunerDetailsThe SyncPro carb tuner is a tool to synchronize intake on engines with multiple carburetors. Maximu...

DescriptionMotion Pro, T-6 hex axle tool lightweightDetails7075-T6 aluminum; With 17, 19, 22 & 24mm; 3/8" drive on both ends; Max. torque 90ft-...

DescriptionMotion Pro, T-handle 10mmDetailsMetric. 6-point head. Also replacement T-handle for 547017 7-piece set. With durable nickel-pewter finish.

DescriptionMotion Pro, T-handle 12mmDetailsMetric. 6-point head. Also replacement T-handle for 547017 7-piece set. With durable nickel-pewter finish.

DescriptionMotion Pro, T-handle 13mmDetailsMetric. 6-point head. Also replacement T-handle for 547017 7-piece set. With durable nickel-pewter finish.

DescriptionMotion Pro, T-handle 14mmDetailsMetric. 6-point head. Also replacement T-handle for 547017 7-piece set. With durable nickel-pewter finish.

DescriptionMotion Pro, T-handle 17mmDetailsMetric. 6-point head. Also replacement T-handle for 547017 7-piece set. With durable nickel-pewter finish.

DescriptionMotion Pro, T-handle 19mmDetailsMetric. 6-point head. Also replacement T-handle for 547017 7-piece set. With durable nickel-pewter finish.

DescriptionMotion Pro, T-handle 8mmDetailsMetric. 6-point head. Also replacement T-handle for 547017 7-piece set. With durable nickel-pewter finish.

DescriptionMotion Pro, T-handle bit driver setDetailsIncludes Phillips no. 1, 2 and 3 S3 tools steel bits. T-handle includes three 5/16" drive ends...

DescriptionMotion Pro, T-handle driver 1/4" driveDetailsChrome vanadium tool steel shafts with durable nickel-pewter finish. 1/4" drive. 8 1/2" (2...

DescriptionMotion Pro, T-handle driver 3/8" driveDetailsChrome vanadium tool steel shafts with durable nickel-pewter finish. 3/8" drive. 10 1/2" ...

DescriptionMotion Pro, Tech Gloves blackDetailsBlack. Premium washable synthetic leather working gloves for mechanics. Extended cuff, reinforced pa...

DescriptionMotion Pro, throttle by wire harness HD B. 46" longDetailsReplacement oversized wire harness for models with electronic throttle. Overal...

DescriptionMotion Pro, throttle by wire harness, HD A. 46" longDetailsReplacement oversized wiring harness for models with electronic throttle. Ove...

DescriptionMotion Pro, Tire bead breaker/lever aluminumDetailsT6 aluminum; Black anodized; Set of two; 255 gram; 9.8" (25cm) over all lengthUniv.

DescriptionMotion Pro, tire pressure gaugeDetailsWith 0-60 psi & 420 KPA face (0-4.14 bar); Liquid filled 2.5" (6.4cm) diameter gauge; Blue ano...

DescriptionMotion Pro, tire pressure gauge holderDetailsAluminum holder; with backside magnet; Holds all regular gauges / inflatorsUNIV.

DescriptionMotion Pro, tire valve core remover toolDetailsRemoves and installs standard valve cores in tubed or tubeless valve stems (Schrader valve)

DescriptionMotion Pro, univ. retaining ring plier setDetailsUniversal circlip / snap ring pliers with reversible spring loaded handles. Will work o...