Pre-Evo

DescriptionEV27 CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatBolt-in street cam with fast open ...

Description4-Speed Countershaft ComponentSold individually, unless noted.DetailsProduct Name : GearUnits : EachType : Stock ClusterStyle : Standard...

Description4-Speed Mainshaft ComponentSold individually, unless noted.DetailsProduct Name : GearType : Main DriveUnits : EachStyle : Standard Ratio...

DescriptionEV23 CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatBolt-in cam for heavier touring bi...

DescriptionShifter ForkOne piece cold-forged forkFully heat treated and black oxide coatedMade in the U.S.A.DetailsTransmission Type : 4 SpeedProdu...

DescriptionEZ-Install PushrodsEZ-install pushrods eliminate the need to disassemble your rocker boxes or remove the gas tank when changing cams or ...

DescriptionEV31 CamAndrews Products grinds its cams with the help of a computer with cam design capabilities. This superior technology gives the ut...

DescriptionValve Spring Upper CollarsSimilar to stock 80-style parts, but lower profile for easier installation of higher lift camsRequired parts i...

DescriptionMedium-Lift Upper Spring Collar SetIntended to work with stock springs and add approximately .060" spring travel with no other modificat...

Description7 Grind CamGreat street cam, especially for 84/88-inch strokers with maximum torque from 2,200 to 6,500 rpmUpgraded version of the origi...

DescriptionBlack Vinyl Throttle/Idle CableCables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an i...

DescriptionStainless Braided Throttle/Idle CableCables feature polished-chrome fittings and stainless-steel braiding outer casings, tempered-steel ...

DescriptionStainless Braided Throttle/Idle CableCables feature polished-chrome fittings and stainless-steel braiding outer casings, tempered-steel ...

DescriptionShifter ForkOne piece cold-forged forkFully heat treated and black oxide coatedMade in the U.S.A.DetailsTransmission Type : 4 SpeedUnits...

DescriptionGrind CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatMade in the U.S.A.Bolt-in perform...

DescriptionEV13 CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatBolt-in cam for street or touring ...

DescriptionGrind CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatMade in the U.S.A.Most are bolt-i...

DescriptionEV3 CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatA 6000+ rpm cam for stock heads and...

DescriptionGrind CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatMade in the U.S.A.Bolt-in street ...

DescriptionGrind CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatMade in the U.S.A.For mild street...

DescriptionReplacement Pushrod KitPushrods fit Shovel engines using stock diameter tubing so there is no cover tube interferenceFor stock stroke ap...

DescriptionBlack Vinyl Throttle/Idle CableCables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an i...

Description4-Speed MainshaftSold individually, unless noted.DetailsProduct Name : MainshaftUnits : EachStyle : 4-SpeedType : TransmissionFitmentHar...

Description4-Speed Countershaft ComponentSold individually, unless noted.DetailsType : First Gear| Second GearProduct Name : Counter Shaft Clutch G...

DescriptionBlack Vinyl Throttle/Idle CableCables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an i...

DescriptionHigh-Lift Valve SpringsProvide correct spring force for any of our performance cams when used in 74" and 80" motorsMax lift; installatio...

DescriptionB2 Grind CamMore mid-range and high-end power for street/strip with smooth idle; best cam for 74/80 inchers and small strokersSpring spa...

DescriptionEZ-Install PushrodsEZ-install pushrods eliminate the need to disassemble your rocker boxes or remove the gas tank when changing cams or ...

DescriptionAdjustable PushrodsAndrews completely adjustable pushrods easily replace the nonadjustable stock pushrods on Evolution enginesRocker box...

Description4-Speed Mainshaft ComponentSold individually, unless noted.DetailsProduct Name : GearUnits : EachType : ClutchFitmentHarley Davidson F 1...

DescriptionStainless Braided Throttle/Idle CableCables feature polished-chrome fittings and stainless-steel braiding outer casings, tempered-steel ...

DescriptionLow-Compression CamDesigned with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output th...

Description4-Speed Mainshaft ComponentSold individually, unless noted.DetailsStyle : Close RatioProduct Name : Gear SetUnits : SetFirst Gear Ratio ...

DescriptionHigh-Lift Valve Spring KitAccommodates cam lifts of .550"+Installation does not require machining of headsKit includes four inner and fo...

DescriptionEV51 CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatEasy installationWorks with stock ...

DescriptionGrind CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatMade in the U.S.A.Longer exhaust ...

DescriptionEV7 CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatExcellent in the 2800-6500 rpm rang...

DescriptionEV59 CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatDesigned for modified 80" to 88" m...

DescriptionGrind CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatMade in the U.S.A.Designed for mi...

Description4-Speed CountershaftSold individually, unless noted.DetailsUnits : EachType : TransmissionProduct Name : CountershaftStyle : 4-SpeedFitm...

Description4-Speed Mainshaft ComponentSold individually, unless noted.DetailsProduct Name : GearStyle : Standard RatioUnits : EachThird Gear Ratio ...

Description4-Speed Mainshaft ComponentSold individually, unless noted.DetailsType : First GearFirst Gear Ratio : 2.60:1Units : SetProduct Name : Ge...

Description4-Speed Mainshaft ComponentSold individually, unless noted.DetailsFirst Gear Ratio : 2.44:1Type : First GearUnits : SetProduct Name : Ge...

Description4-Speed Mainshaft ComponentSold individually, unless noted.DetailsType : Third GearThird Gear Ratio : 1.35:1Units : SetStyle : Close Rat...

DescriptionEV72 CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatFor use with Andrews springs and t...

Description4-Speed Gear SetGears are made from high-nickel alloy steel, heat-treated and shot-peened to give maximum durability and strengthMade in...

Description4-Speed Gear SetGears are made from high-nickel alloy steel, heat-treated and shot-peened to give maximum durability and strengthMade in...

DescriptionAdjustable PushrodsAndrews completely adjustable pushrods easily replace the nonadjustable stock pushrods on Evolution enginesRocker box...