Pre-Evo

DescriptionClutch Friction Plate SetIncreased surface area for decreased slippingIncrease holding while decreasing heat generationPrecision-made st...

Description4-Speed Countershaft ComponentSold individually, unless noted.DetailsProduct Name : GearUnits : EachType : Stock ClusterStyle : Standard...

Description4-Speed Mainshaft ComponentSold individually, unless noted.DetailsProduct Name : GearType : Main DriveUnits : EachStyle : Standard Ratio...

DescriptionShifter ForkOne piece cold-forged forkFully heat treated and black oxide coatedMade in the U.S.A.DetailsTransmission Type : 4 SpeedProdu...

DescriptionValve Spring Upper CollarsSimilar to stock 80-style parts, but lower profile for easier installation of higher lift camsRequired parts i...

DescriptionMedium-Lift Upper Spring Collar SetIntended to work with stock springs and add approximately .060" spring travel with no other modificat...

Description7 Grind CamGreat street cam, especially for 84/88-inch strokers with maximum torque from 2,200 to 6,500 rpmUpgraded version of the origi...

DescriptionClutch Hub LiningReplacement lining comes complete with rivetsMade in the U.S.A.DetailsProduct Name : Hub LiningUnits : EachType : Clutc...

DescriptionSteel Plate SetPrecision-madeDetailsUnits : Set of 4Material : SteelProduct Name : Plate SetType : ClutchFitmentHarley-Davidson FLH 1200...

DescriptionBlack Vinyl Throttle/Idle CableCables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an i...

DescriptionShifter ForkOne piece cold-forged forkFully heat treated and black oxide coatedMade in the U.S.A.DetailsTransmission Type : 4 SpeedUnits...

DescriptionGrind CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatMade in the U.S.A.Most are bolt-i...

DescriptionGrind CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatMade in the U.S.A.Bolt-in street ...

DescriptionGrind CamThese hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatMade in the U.S.A.For mild street...

DescriptionReplacement Pushrod KitPushrods fit Shovel engines using stock diameter tubing so there is no cover tube interferenceFor stock stroke ap...

DescriptionSteel PlatePrecision-made clutch platePriced each.DetailsUnits : EachDrive Plate Material : SteelStyle : StandardProduct Name : Clutch P...

Description4-Speed MainshaftSold individually, unless noted.DetailsProduct Name : MainshaftUnits : EachStyle : 4-SpeedType : TransmissionFitmentHar...

Description4-Speed Countershaft ComponentSold individually, unless noted.DetailsType : First Gear| Second GearProduct Name : Counter Shaft Clutch G...

Description4-Speed CountershaftSold individually, unless noted.DetailsProduct Name : CountershaftType : TransmissionUnits : EachStyle : 4-SpeedFitm...

DescriptionHigh-Lift Valve SpringsProvide correct spring force for any of our performance cams when used in 74" and 80" motorsMax lift; installatio...

DescriptionB2 Grind CamMore mid-range and high-end power for street/strip with smooth idle; best cam for 74/80 inchers and small strokersSpring spa...

DescriptionStainless Braided Throttle/Idle CableCables feature polished-chrome fittings and stainless-steel braiding outer casings, tempered-steel ...

DescriptionSteel Plate Set with Anti-RattlerPrecision-made with anti-rattlerWith anti-rattler.DetailsMaterial : SteelType : ClutchProduct Name : Pl...

Description4-Speed Mainshaft ComponentSold individually, unless noted.DetailsProduct Name : GearUnits : EachType : ClutchFitmentHarley Davidson F 1...