Drag Specialties

DescriptionPassenger Footpeg Mount KitsBillet steel mounting kit allows for the mounting of passenger footpegs in place of the OEM floorboardsAccep...

DescriptionPolished Stainless Steel Brake RotorConstructed of 430 stainless steel and polished to a mirror-like finish11.5" or 11.8" in diameterDet...

DescriptionExtended Length Black Vinyl Brake Line KitFeatures black vinyl-coated braided extended lines with chrome steel fittingsMade in the U.S.A...

DescriptionStainless Steel Drilled Brake RotorGround finishDrilled for better heat dissipation and consistent braking in wet weatherDesigned for us...

DescriptionPolished Stainless Steel Brake RotorConstructed of 430 stainless steel and polished to a mirror-like finish11.5" or 11.8" in diameterDet...

DescriptionPushrod Tube KitKits include upper and lower tubes, clips, cups, springs and washers (O-rings/corks sold separately)One kit will do a co...

DescriptionSplit Skull Derby CoverSplit skull derby coversDie-cast constructionMatch other Drag Specialties Split Skull coversDetailsColour/Finish ...

DescriptionDerby CoverDie-cast construction with a domed designIncludes mounting hardware'06 Dyna Glide and all '07-'18 Big Twin (except '16-'18 Dr...

Description1-1/4" Buffalo Touring HandlebarDiamond-knurled and machined for internal wiringAccept stock controls and handlebar clampDesigned specif...

DescriptionCustom Rubber GripsFeature die-cast constructionCustom rubber insets for all-day ridingLeft side grip features setscrew attachmentDetail...

DescriptionXL Primary CoverDie-cast aluminium constructionInspection covers and derby covers are available separatelyDetailsMaterial : Aluminium| D...

DescriptionHandlebar SwitchOEM-replacement switch kits with color-coded leads and black protective sleeves60" leadsIndividual switches are also ava...

DescriptionWheel SpacerPolished and chrome-platedOEM replacementsDetailsAxle Diameter : 25,4 mm (1")Length : 58,8 mm (2,313")Material : SteelProduc...

DescriptionHigh-Efficiency Black Vinyl Clutch CableCables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon...

DescriptionHandlebar Control KitAluminium constructionKits include a brake master cylinder assembly and a clutch control assemblyMaster cylinders a...

DescriptionChrome Front Fork BraceIncrease the torsional rigidity of your front forkProvides a great looking accessory that also improves handlingC...

DescriptionBig Buffalo Engine GuardMade from 1.5" diameter steel tubingMade in the U.S.A.Not for use on models with fairing lowersDetailsMounting P...

DescriptionSplit Skull Point CoverDie-cast constructionMatches other Drag Specialties Split Skull productsDetailsProduct Name : CoverColour/Finish ...

DescriptionHigh-Efficiency Braided Stainless Steel Clutch CableLow effort, maximum efficiency cable design meets or exceeds all OEM specifications ...

DescriptionStainless Braided Throttle/Idle CableCables feature polished-chrome fittings and stainless-steel braiding outer casings, tempered-steel ...

DescriptionReplacement Turn Signal LensFlat transparent lens for OEM and most aftermarket Deuce-style turn signalsNot DOT compliantDetailsType : Tu...

DescriptionBlack Vinyl Throttle/Idle CableCables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an i...

DescriptionSlotted Wide Blade Lever SetWide blade levers sets are made with strong, high-quality aluminium with CNC-machined slotsIncludes anti-rat...

DescriptionSplit Skull Point CoverDie-cast constructionMatches other Drag Specialties Split Skull productsDetailsUnits : EachColour/Finish : Chrome...

Description530 Chain Conversion Rear SprocketConvert rear drive belt to 530 chain2.22" Centre diameterDetailsTEETH : 51MATERIAL : SteelPITCH : 530P...

Description1-1/4" Buffalo Touring HandlebarDiamond-knurled and machined for internal wiringAccept stock controls and handlebar clampDesigned specif...

DescriptionFender-To-Fork AdapterAdapt FLSTF front fender to any FLT or FLHT style forkWorks with Drag Specialties Steel Front Fender - see Relate...

DescriptionFork Leg Lower StopPrecision machined for an exact fitFor all '00-'17 models with 41 mm Showa forks.DetailsFor Fork Tube Diameter : 41,0...

DescriptionShift LeverHigh-quality, levers are excellent OEM replacementsStrong, die-cast construction is reinforced for extra strengthShift pegs s...

DescriptionOEM Rear FenderRaw, stamped-steel constructionPre-drilled for easy installation and accepts all the OE components and taillight assembly...

DescriptionExtended Length Black Vinyl Brake Line KitFeatures black vinyl-coated braided extended lines with chrome steel fittingsMade in the U.S.A...

DescriptionHigh-Efficiency Braided Stainless Steel Clutch CableLow effort, maximum efficiency cable design meets or exceeds all OEM specifications ...

DescriptionBlack Vinyl Throttle/Idle CableCables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an i...

DescriptionPassenger Floorboard Mount KitIncludes all necessary installation hardware and instructionsFLSTC models require the purchase of a saddle...

DescriptionPop-Up Gas CapReplace your stock cap and gas gauge with this sleek additionFits nearly flush, opens easily with a quarter-turn of the ca...

DescriptionFork TubesHighly durable hard chrome finishOffer less drag and improved seal wearAccepts all OEM componentsNot for use with Dresser mode...

DescriptionBraided Hose Crankcase Breather KitOutlet side of assembly is long enough to custom-route the hose and mount the breather filter in an i...

DescriptionStainless Braided Throttle/Idle CableCables feature polished-chrome fittings and stainless-steel braiding outer casings, tempered-steel ...

DescriptionSlotted Wide Blade Lever SetWide blade levers sets are made with strong, high-quality aluminium with CNC-machined slotsIncludes anti-rat...

DescriptionDisc Brake Hub Mounting KitGrade 8 boltsLarge-diameter button-head Torx® heads for increased load-bearing surfaceMade in the U.S.A.Deta...

DescriptionCustom Oil DipstickExact replacement for OEM dipstickIncludes the swivelling dipstickChrome-plated with clean "peaked" design capsDetail...

DescriptionShift LeverHigh-quality, levers are excellent OEM replacementsStrong, die-cast construction is reinforced for extra strengthShift pegs s...

DescriptionLive To Ride Derby CoverFeature a detailed plated eagle and bannerScript is recessed06 Dyna Glide and all 07-18 applications (except 16-...

DescriptionWheel SpacerPolished and chrome-platedOEM replacementsDetailsCompatibility : OEM CompatibleProduct Name : Axle SpacerMaterial : SteelLen...

DescriptionKickstandHigh-strength steel kickstandReplace OEM kickstands perfectlyBig Twin, Softail, FLT and XL kickstands are measured from the fir...

DescriptionStainless Braided Throttle/Idle CableCables feature polished-chrome fittings and stainless-steel braiding outer casings, tempered-steel ...

DescriptionBlack Vinyl Throttle/Idle CableCables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an i...

DescriptionDresser Style Screw-In Gas CapDirect OEM replacementVented, with black finishIncludes gasketDetailsMounting Style : Screw OnBase Colour ...