Softail

DescriptionRing Set for S&S PistonsReplacement ring set for S&S PistonsReplacement Ring Sets for S&S Pistons OnlyDetailsPiston Size Imp...

DescriptionPiston KitAll piston kits come with two pistons, rings, wrist pins, and wrist pin keepersCompression ratios listed are approximate and a...

DescriptionAir Cleaner CoverInstallation of an S&S air cleaner may require re-jetting or engine re-tuning, however tuning within the OEM emissi...

DescriptionDual-Cable Throttle Assembly KitEach kit includes a two-cable throttle assembly with matching grips, throttle sleeve, OEM-style throttle...

DescriptionCam Installation KitKits include all required parts needed when servicing or changing gear- or chain-drive cams in a Twin Cam motorMade ...

DescriptionAdjustable Pushrods.4375" diameter chromoly steel for maximum strengthRocker boxes must be removed for installation or removalMade in th...

DescriptionSuper E and G Shorty Carburettor KitSuper E has a 1-7/8" throat at the butterfly and a 1-9/16" venturi and is recommended for use on Big...

DescriptionGasket KitMade in the U.S.A.DetailsBore Size : 4,000"Product Name : Gasket KitFeatures : For '99 - '06 Super Stock S&S Twin CamType ...

DescriptionGasket KitMade in the U.S.A.DetailsFeatures : For '99 - '06 Super Stock S&S Twin CamProduct Name : Gasket KitBore Size : 3,875"Type ...

DescriptionIntelligent Spark Technology (IST) Ignition System SensorThe S&S system makes use of crank position sensor, cam position sensor if p...

DescriptionReplacement Piston RingsReplacement piston rings for 106" applicationsReplacement Ring Sets for S&S Pistons OnlyDetailsProduct Name ...

Description106" Piston KitThese forged 3-7/8" bore stroker pistons for 1999-'16 HD® Big Twin are required for the S&S 106" stock bore stroker k...

Description106" Piston KitThese forged 3-7/8" bore stroker pistons for 1999-'16 HD® Big Twin are required for the S&S 106" stock bore stroker k...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsWidth : 28,6 mm (1-1/8")Product Name : BeltType : Rea...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsProduct Name : BeltTooth Count : 128Material : X3N Ca...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsMaterial : X3N CarbonProduct Name : BeltTooth Count :...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsProduct Name : BeltUnits : EachTooth Count : 135Width...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsMaterial : X3N CarbonProduct Name : BeltUnits : EachT...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsTooth Count : 130Material : X3N CarbonProduct Name : ...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsMaterial : X3N CarbonTooth Count : 128Units : EachWid...

DescriptionIntake FlangeDesigned specifically for S&S intake manifoldsMade in the U.S.A.DetailsColour/Finish : RawMaterial : AluminiumProduct N...

DescriptionIntake FlangeDesigned specifically for S&S intake manifoldsMade in the U.S.A.DetailsModel : FType : O-RingMaterial : AluminiumBase F...

DescriptionSpigot-Mount Intake ManifoldUsed to install a stock CV carburettor on S&S 3.625", 4" and 4.125" bore motorsWill also fit S&S Hot...

DescriptionSpigot-Mount Intake ManifoldUsed to install a stock CV carburettor on S&S 3.625", 4" and 4.125" bore motorsWill also fit S&S Hot...

DescriptionIntake Manifold FlangeReplacement seals also availableMade in the U.S.A.DetailsType : FlangeProduct Name : Intake ManifoldUnits : PairCo...

DescriptionFlange Mount Intake ManifoldFor mounting an S&S E and G series carburettor or flange mount carburettor on a 99-06 Twin Cam motor wit...

DescriptionIdle Air Control Motor KitFor single bore throttle bodiesFor idle air control motor SS EFI with hardware, 1995-'05.DetailsBase Colour : ...

DescriptionStealth Air Cleaner CoverFit the S&S Stealth air cleaner kitsMade in the U.S.A.DetailsMaterial : Die CastModel : StealthType : Air C...

DescriptionAir Cleaner CoverInstallation of an S&S air cleaner may require re-jetting or engine re-tuning, however tuning within the OEM emissi...

DescriptionSuper Stock™ Stealth Air Filter ComponentFor stock and S&S fuel system applicationsMade in the U.S.A.NOTE: 01-18 EFI models exempt p...

DescriptionOptional Stealth Hi-Flo Filter Kit (1" Taller)Replacement/Optional ComponentsNOTE: 01-18 EFI models exempt per CARB EXECUTIVE ORDER (EO)...

Description Super Stock™ Stealth Replacement Air FilterReplacement Stealth filter NOTE: 01-18 EFI models exempt per CARB EXECUTIVE ORDER (EO) #D-35...

DescriptionReplacement Filter ElementReplacement componentNOTE: 01-18 EFI models are exempt per CARB EXECUTIVE ORDER # D-355-24. NOTE: Installatio...

DescriptionTuned Induction Air CleanerIncreases horsepower and torque across the rpm range using air column inertia and carefully timed gas dynamic...

DescriptionAir Cleaner KitS&S Classic Teardrop Air Cleaner Kit for S&S Single Bore Throttle Body.Dimpled cover with directional air cone on...

DescriptionReplacement CV Adapter Backplate GasketMade in the U.S.A.NOTE: 01-18 EFI models are exempt per CARB EXECUTIVE ORDER # D-355-24. NOTE: I...