Softail

DescriptionVibration Dampening Memory Foam GripsThe softest, most durable, chemical resistant grips on the market todayA true vibration dampening g...

DescriptionVibration Dampening Memory Foam GripsThe softest, most durable, chemical resistant grips on the market todayA true vibration dampening g...

DescriptionDetailsType : OilApplication : Oil PumpUnits : 25 PackProduct Name : O-RingFitmentHarley-Davidson FL 1200 Electra Glide - 1970, 1971, 19...

DescriptionExtended Length Girder Shift LeverUnique design offers increased leverage and more comfortStyling matches the Magnum mirrors and stirrup...

DescriptionExhaust GasketsMade in the U.S.A. by James GasketsDetailsType : ExhaustProduct Name : GasketUnits : KitFitmentHarley-Davidson FLD 1690 D...

DescriptionEvolution-Style Aluminium CylindersStock replacement cylinders, 3.5" bore with cast-iron linerFor 80" or 89" enginesMade in the U.S.A.De...

DescriptionAir Cleaner KitInclude an S&S cover, backing plate and high-quality filter element and hardware kitAvailable for most OEM carburetto...

DescriptionDual-Cable Throttle Assembly KitEach kit includes a two-cable throttle assembly with matching grips, throttle sleeve, OEM-style throttle...

DescriptionHigh-Lift Valve Spring KitTo be used with cams with up to .550" liftIncludes springs and aluminium top retainers140-lb. seat pressureMus...

Description560S CamS&S cams are tested on the dyno, street and racetrack before being offered to the publicWith hundreds of test hours on them,...

Description514 CamS&S cams are tested on the dyno, street and racetrack before being offered to the publicWith hundreds of test hours on them, ...

DescriptionHeavy-Duty Connecting Rod SetsHigh-quality, heavy duty rod sets come complete and ready to installSet includes front and rear rods, cran...

DescriptionSuper Stock™ Engine CaseCast from A356 T-6 heat-treated aluminium alloyMachined to accept an oil filter assembly that mounts on the fron...

DescriptionSuper Stock™ Engine CaseCast from A356 T-6 heat-treated aluminium alloyMachined to accept an oil filter assembly that mounts on the fron...

DescriptionPinion GearHigh-quality pinion gears are carefully machined, heat-treated and then finish groundMade in the U.S.A.DetailsProduct Name : ...

DescriptionPinion GearHigh-quality pinion gears are carefully machined, heat-treated and then finish groundMade in the U.S.A.DetailsUnits : EachPro...

DescriptionReplacement Billet Oil Pump Gasket KitMade in the U.S.A.DetailsProduct Name : GasketType : Oil PumpUnits : KitFitmentHarley-Davidson E 1...

DescriptionHeavy-Duty Connecting Rod SetsHigh-quality, heavy duty rod sets come complete and ready to installSet includes front and rear rods, cran...

DescriptionSuper E and G Shorty Carburettor KitSuper E has a 1-7/8" throat at the butterfly and a 1-9/16" venturi and is recommended for use on Big...

DescriptionGasket KitMade in the U.S.A.DetailsUnits : KitProduct Name : Gasket KitType : Top EndBore Size : 4,125"FitmentHarley-Davidson FLH 1340 E...

DescriptionGasket KitMade in the U.S.A.DetailsFeatures : For '84 - '99 Super Stock S&S Evolution Big TwinProduct Name : Gasket KitUnits : KitBo...

DescriptionTop End Gasket KitIncludes set of head and base gaskets, exhaust gaskets and O-ringsLayered steel head gasketsMade in the U.S.A.Kit does...

DescriptionGasket KitMade in the U.S.A.DetailsType : Top EndProduct Name : Gasket KitBore Size : 3,625"Units : KitFitmentHarley-Davidson FL 1200 El...

DescriptionChrome Rocker BoxesPositive O-ring seal ensures leak-free operationCan be installed with the stock engine in the frame in most applicati...

DescriptionPinion Shaft Conversion KitMust be used as a set or with OEM equivalentsMade in the U.S.A.DetailsType : Pinion ShaftUnits : KitProduct N...

DescriptionSolid Lifter Conversion KitConverts stock hydraulic lifters to adjustable solidsKit includes four nonadjustable steel pushrods, four adj...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsWidth : 28,6 mm (1-1/8")Product Name : BeltType : Rea...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsProduct Name : BeltTooth Count : 128Material : X3N Ca...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsMaterial : X3N CarbonProduct Name : BeltTooth Count :...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsProduct Name : BeltUnits : EachTooth Count : 135Width...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsMaterial : X3N CarbonProduct Name : BeltUnits : EachT...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsTooth Count : 130Material : X3N CarbonProduct Name : ...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsMaterial : X3N CarbonTooth Count : 128Units : EachWid...

DescriptionSpigot-Mount Intake ManifoldUsed to install a stock CV carburettor on S&S 3.625", 4" and 4.125" bore motorsWill also fit S&S Hot...

DescriptionIntake Manifold FlangeReplacement seals also availableMade in the U.S.A.DetailsType : FlangeProduct Name : Intake ManifoldUnits : PairCo...

DescriptionFlange-Mount Intake ManifoldCan be used to replace stock "compliance fitting" manifold on 84-89 and stock rigid-mount manifold from 90-9...

DescriptionStandard Intake ManifoldL78-84 Shovelheads use rubber-band-type intake seals66-E78 Shovelheads use O-ring-type intake sealsCompatible wi...

DescriptionFlange Mount Intake ManifoldFor mounting an S&S E and G series carburettor or flange mount carburettor on a 99-06 Twin Cam motor wit...

DescriptionIntake Manifold ClampClamps are 3/4" wide and constructed of .020" thick stainless steel and use a curved 10-24 threaded "T"-bolt with p...

DescriptionSuper Stock™ Stealth Air Cleaner KitBuilt-in stinger cone directs air smoothly into the bore of the carburettor or EFI throttle body and...

Description Details Fitment Tuned Induction Air CleanerSwept forward, two-in-one design rams additional air into the cylinderNatural sup...

Description Details Fitment Tuned Induction Air CleanerSwept forward, two-in-one design rams additional air into the cylinderNatural sup...

DescriptionSuper E and G Shorty Carburettor KitSuper E has a 1-7/8" throat at the butterfly and a 1-9/16" venturi and is recommended for use on Big...

DescriptionPinion GearHigh-quality pinion gears are carefully machined, heat-treated and then finish groundMade is the U.S.ADetailsProduct Name : G...

DescriptionPinion GearHigh-quality pinion gears are carefully machined, heat-treated and then finish groundMade is the U.S.A1.451 - 1.456DetailsCol...

DescriptionPinion Shaft Gear NutOEM or better qualityMade in the U.S.A.DetailsProduct Name : Crankpin NutUnits : EachFitmentHarley-Davidson FL 1200...

DescriptionCam Cover KitMachined from tough 356-T6 aluminium castings, the same material used to make S&S crankcasesFeatures an inner cast alum...

DescriptionBillet Cam Cover KitMachined from solid 6061 billet aluminiumMade in the U.S.A.DetailsType : CamBase Finish : ChromeColour/Finish : Chro...