Softail

DescriptionPinion Shaft Conversion KitMust be used as a set or with OEM equivalentsMade in the U.S.A.DetailsType : Pinion ShaftUnits : KitProduct N...

DescriptionSolid Lifter Conversion KitConverts stock hydraulic lifters to adjustable solidsKit includes four nonadjustable steel pushrods, four adj...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsWidth : 28,6 mm (1-1/8")Product Name : BeltType : Rea...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsProduct Name : BeltTooth Count : 128Material : X3N Ca...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsMaterial : X3N CarbonProduct Name : BeltTooth Count :...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsProduct Name : BeltUnits : EachTooth Count : 135Width...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsMaterial : X3N CarbonProduct Name : BeltUnits : EachT...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsTooth Count : 130Material : X3N CarbonProduct Name : ...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsMaterial : X3N CarbonTooth Count : 128Units : EachWid...

DescriptionSpigot-Mount Intake ManifoldUsed to install a stock CV carburettor on S&S 3.625", 4" and 4.125" bore motorsWill also fit S&S Hot...

DescriptionIntake Manifold FlangeReplacement seals also availableMade in the U.S.A.DetailsType : FlangeProduct Name : Intake ManifoldUnits : PairCo...

DescriptionFlange-Mount Intake ManifoldCan be used to replace stock "compliance fitting" manifold on 84-89 and stock rigid-mount manifold from 90-9...

DescriptionStandard Intake ManifoldL78-84 Shovelheads use rubber-band-type intake seals66-E78 Shovelheads use O-ring-type intake sealsCompatible wi...

DescriptionFlange Mount Intake ManifoldFor mounting an S&S E and G series carburettor or flange mount carburettor on a 99-06 Twin Cam motor wit...

DescriptionIntake Manifold ClampClamps are 3/4" wide and constructed of .020" thick stainless steel and use a curved 10-24 threaded "T"-bolt with p...

DescriptionSuper Stock™ Stealth Air Cleaner KitBuilt-in stinger cone directs air smoothly into the bore of the carburettor or EFI throttle body and...

Description Details Fitment Tuned Induction Air CleanerSwept forward, two-in-one design rams additional air into the cylinderNatural sup...

Description Details Fitment Tuned Induction Air CleanerSwept forward, two-in-one design rams additional air into the cylinderNatural sup...

DescriptionSuper E and G Shorty Carburettor KitSuper E has a 1-7/8" throat at the butterfly and a 1-9/16" venturi and is recommended for use on Big...

DescriptionPinion GearHigh-quality pinion gears are carefully machined, heat-treated and then finish groundMade is the U.S.ADetailsProduct Name : G...

DescriptionPinion GearHigh-quality pinion gears are carefully machined, heat-treated and then finish groundMade is the U.S.A1.451 - 1.456DetailsCol...

DescriptionPinion Shaft Gear NutOEM or better qualityMade in the U.S.A.DetailsProduct Name : Crankpin NutUnits : EachFitmentHarley-Davidson FL 1200...

DescriptionCam Cover KitMachined from tough 356-T6 aluminium castings, the same material used to make S&S crankcasesFeatures an inner cast alum...

DescriptionBillet Cam Cover KitMachined from solid 6061 billet aluminiumMade in the U.S.A.DetailsType : CamBase Finish : ChromeColour/Finish : Chro...

DescriptionBillet Cam Cover KitMachined from solid 6061 billet aluminiumMade in the U.S.A.DetailsColour/Finish : PolishedType : CamProduct Name : C...

DescriptionHead and Base Gasket KitHead gaskets are made from aramid fibre-reinforced premium graphite material with a steel core, stainless steel ...

DescriptionHead and Base Gasket KitHead gaskets are made from aramid fibre-reinforced premium graphite material with a steel core, stainless steel ...

DescriptionRocker Cover Gasket KitIncludes all required gaskets and O-rings for both rocker boxesDetailsProduct Name : Gasket KitFeatures : For '66...

DescriptionDetailsFitmentHarley-Davidson FL 1200 Electra Glide - 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977Harley-Davidson FLB 1200 Electra Gli...

DescriptionHead Installation Gasket SetGasket Kit contains head gaskets, base gaskets and exhaust pipe gaskets (rocker box gaskets are not included...

DescriptionHead Installation Gasket SetGasket Kit contains head gaskets, base gaskets and exhaust pipe gaskets (rocker box gaskets are not included...

DescriptionHead Installation Gasket SetGasket Kit contains head gaskets, base gaskets and exhaust pipe gaskets (rocker box gaskets are not included...

DescriptionOil Pump Idler ShaftOil pump idler shaft for Big Twin modelsDetailsUnits : EachType : IdlerProduct Name : ShaftFitmentHarley-Davidson FL...

DescriptionOil Pump Drive GearOil pump drive gear for Big Twin modelsDetailsUnits : EachProduct Name : GearType : Drive| Oil Pump| SupplyFitmentHar...

DescriptionOil Pump Idler GearOil pump idler gear for Big Twin ModelsDetailsProduct Name : GearUnits : EachType : Idler| Oil Pump| ReturnFitmentHar...

DescriptionOil Pump Drive GearOil pump drive gear for Big Twin modelsDetailsProduct Name : GearType : Drive| Oil Pump| ReturnUnits : EachFitmentHar...