Softail

DescriptionExhaust GasketsMade in the U.S.A. by James GasketsDetailsType : ExhaustProduct Name : GasketUnits : KitFitmentHarley-Davidson FLD 1690 D...

DescriptionEvolution-Style Aluminium CylindersStock replacement cylinders, 3.5" bore with cast-iron linerFor 80" or 89" enginesMade in the U.S.A.De...

DescriptionAir Cleaner CoverInstallation of an S&S air cleaner may require re-jetting or engine re-tuning, however tuning within the OEM emissi...

DescriptionAir Cleaner KitInclude an S&S cover, backing plate and high-quality filter element and hardware kitAvailable for most OEM carburetto...

DescriptionDual-Cable Throttle Assembly KitEach kit includes a two-cable throttle assembly with matching grips, throttle sleeve, OEM-style throttle...

DescriptionHigh-Lift Valve Spring KitTo be used with cams with up to .550" liftIncludes springs and aluminium top retainers140-lb. seat pressureMus...

Description560S CamS&S cams are tested on the dyno, street and racetrack before being offered to the publicWith hundreds of test hours on them,...

Description514 CamS&S cams are tested on the dyno, street and racetrack before being offered to the publicWith hundreds of test hours on them, ...

DescriptionHeavy-Duty Connecting Rod SetsHigh-quality, heavy duty rod sets come complete and ready to installSet includes front and rear rods, cran...

DescriptionSuper Stock™ Engine CaseCast from A356 T-6 heat-treated aluminium alloyMachined to accept an oil filter assembly that mounts on the fron...

DescriptionSuper Stock™ Engine CaseCast from A356 T-6 heat-treated aluminium alloyMachined to accept an oil filter assembly that mounts on the fron...

DescriptionPinion GearHigh-quality pinion gears are carefully machined, heat-treated and then finish groundMade in the U.S.A.DetailsProduct Name : ...

DescriptionPinion GearHigh-quality pinion gears are carefully machined, heat-treated and then finish groundMade in the U.S.A.DetailsUnits : EachPro...

DescriptionReplacement Billet Oil Pump Gasket KitMade in the U.S.A.DetailsProduct Name : GasketType : Oil PumpUnits : KitFitmentHarley-Davidson E 1...

DescriptionOil Pump Components for Evo Big TwinHardware, check balls, retainers, etc. are available for Big Twin oil pumpsDetailsUnits : EachProduc...

DescriptionHeavy-Duty Connecting Rod SetsHigh-quality, heavy duty rod sets come complete and ready to installSet includes front and rear rods, cran...

DescriptionSuper E and G Shorty Carburettor KitSuper E has a 1-7/8" throat at the butterfly and a 1-9/16" venturi and is recommended for use on Big...

DescriptionRing Set for S&S PistonsReplacement ring set for S&S PistonsDetailsBore Size : 4,000"Piston Size : +0,010"Product Name : Piston ...

DescriptionRing Set for S&S PistonsReplacement ring set for S&S PistonsDetailsPiston Size Imperial : +0.020"Units : SetBore Size : 3,645"Pi...

DescriptionRing Set for S&S PistonsReplacement ring set for S&S PistonsDetailsUnits : SetBore Size : 3,635"Piston Size : +0,010"Piston Size...

DescriptionGasket KitMade in the U.S.A.DetailsUnits : KitProduct Name : Gasket KitType : Top EndBore Size : 4,125"FitmentHarley-Davidson FLH 1340 E...

DescriptionGasket KitMade in the U.S.A.DetailsFeatures : For '84 - '99 Super Stock S&S Evolution Big TwinProduct Name : Gasket KitUnits : KitBo...

DescriptionTop End Gasket KitIncludes set of head and base gaskets, exhaust gaskets and O-ringsLayered steel head gasketsMade in the U.S.A.Kit does...

DescriptionGasket KitMade in the U.S.A.DetailsType : Top EndProduct Name : Gasket KitBore Size : 3,625"Units : KitFitmentHarley-Davidson FL 1200 El...

DescriptionChrome Rocker BoxesPositive O-ring seal ensures leak-free operationCan be installed with the stock engine in the frame in most applicati...

DescriptionPinion Shaft Conversion KitMust be used as a set or with OEM equivalentsMade in the U.S.A.DetailsType : Pinion ShaftUnits : KitProduct N...

DescriptionLower End Gasket KitContain the best quality gaskets availableMade in the U.S.A.DetailsProduct Name : Gasket KitType : Lower EndBore Siz...

DescriptionSolid Lifter Conversion KitConverts stock hydraulic lifters to adjustable solidsKit includes four nonadjustable steel pushrods, four adj...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsWidth : 28,6 mm (1-1/8")Product Name : BeltType : Rea...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsProduct Name : BeltTooth Count : 128Material : X3N Ca...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsMaterial : X3N CarbonProduct Name : BeltTooth Count :...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsProduct Name : BeltUnits : EachTooth Count : 135Width...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsMaterial : X3N CarbonProduct Name : BeltUnits : EachT...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsTooth Count : 130Material : X3N CarbonProduct Name : ...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsMaterial : X3N CarbonTooth Count : 128Units : EachWid...

DescriptionIntake ManifoldS&S Style ManifoldsThey have an extra vacuum nipple to accommodate both the VOES and special S&S 4-1/8" bore brea...

DescriptionSpigot-Mount Intake ManifoldUsed to install a stock CV carburettor on S&S 3.625", 4" and 4.125" bore motorsWill also fit S&S Hot...

DescriptionIntake Manifold FlangeReplacement seals also availableMade in the U.S.A.DetailsType : FlangeProduct Name : Intake ManifoldUnits : PairCo...

DescriptionFlange-Mount Intake ManifoldCan be used to replace stock "compliance fitting" manifold on 84-89 and stock rigid-mount manifold from 90-9...

DescriptionStandard Intake ManifoldL78-84 Shovelheads use rubber-band-type intake seals66-E78 Shovelheads use O-ring-type intake sealsCompatible wi...

DescriptionFlange Mount Intake ManifoldFor mounting an S&S E and G series carburettor or flange mount carburettor on a 99-06 Twin Cam motor wit...

DescriptionStealth Air Cleaner CoverFit the S&S Stealth air cleaner kitsMade in the U.S.A.DetailsMaterial : Die CastModel : StealthType : Air C...

DescriptionAir Cleaner CoverInstallation of an S&S air cleaner may require re-jetting or engine re-tuning, however tuning within the OEM emissi...

DescriptionIntake Manifold ClampClamps are 3/4" wide and constructed of .020" thick stainless steel and use a curved 10-24 threaded "T"-bolt with p...

DescriptionSuper Stock™ Stealth Air Filter ComponentFor stock and S&S fuel system applicationsMade in the U.S.A.NOTE: 01-18 EFI models exempt p...

DescriptionOptional Stealth Hi-Flo Filter Kit (1" Taller)Replacement/Optional ComponentsNOTE: 01-18 EFI models exempt per CARB EXECUTIVE ORDER (EO)...

Description Super Stock™ Stealth Replacement Air FilterReplacement Stealth filter NOTE: 01-18 EFI models exempt per CARB EXECUTIVE ORDER (EO) #D-35...

DescriptionReplacement Filter ElementReplacement componentNOTE: 01-18 EFI models are exempt per CARB EXECUTIVE ORDER # D-355-24. NOTE: Installatio...