Tools

Description US sizes. Tool dimension 1/2" wide x 4" long. 11 offset steel blades .008" to .026" (.203mm to .660mm). Fitment Universal Product Detai...

Description US sizes. 16 steel blades .010" to .035" (.254mm to .889mm). Small dimensions with just 1/4" wide x 1-3/4" long. Fitment Universal Prod...

Description US sizes. Tool dimension 1/2" wide x 3 1/2" long. 15 steel blades .002" to .025" (.051mm to .635mm). Plus one 2" steel ruler. Fitment U...

Description For electronic ignitions; Measures .040 to .080" (1.02mm to 2.03mm); built-in gap tool Used to correct and measure spark plug gap. Come...

Description Used on high energy electronic or points ignition systems. Comes with a tapered edge for measuring gap. Gapping is done with center hol...

Description Used to correct and measure spark plug gap. Comes with two built-in electrode adjusting tools. Measures 0.025" to 0.045" (inches) and 0...

Description Bearing packer used to re-grease open bearings with a grease gun. Place bearing between cones and inject grease through the grease nipp...

Description Takes regular bits. Used in confined spaces where a screwdriver will not fit. Place handle over bit and turn; clockwise or counterclock...

Description Standard style. With a rigid pulling head. Hooks behind or into the seal and pulls it out. Prevents damage that could occur when using ...

Description Removes an assortment of wiring harness style receptacle pins. Designed for automotive use; but works equally well on H-D®. Most compre...

Description Insulated. Used to remove spark plug wires. Multi-angle spark plug wire & cartridge fuse puller. Glass-filled nylon. Product Detail...

Description Universal putty knife. Used to remove old gaskets; adhesives; carbon sludge; etc. 1 1-4" wide Fitment Universal Product Details Brand...

Description Used to remove old gaskets; adhesives; carbon sludge; etc. Incl. 3 steel blades of 1"; 1-1/2" and 2" wide. Fitment Universal Product De...

Description Plug ignition wire booth on to tester and crank engine; plug need not be removed. Calibration scew of tool is adjustable to simulate co...

Description Aluminum jaws with a built-in magnet to hold the jaws to your work bench vice. The aluminum is covered with rubber to help prevent scra...

Description Featuring angular cleats. Will clamp flat; round and hex parts. Built-in nitrile magnets allow secure attachment to any steel vice. Fit...

Description Used to remove & install brake shoe spring washers. With side window for easy alignment of nail and washer slot. Product Details ...

Description Used to remove & install brake shoe springs in brake drums. Removes hook from the post when tool is turned. ''Shoe horn'' design on...

Description Used to remove & install brake shoe springs in brake drums. Removes and installs brake springs that do not use an anchor pin or tha...

Description Used to install and remove externally mounted retaining rings. With large; non-pointed; knurled 90° angled flat tips for a good grip. O...

Description Used to remove & install brake shoe springs in brake drums. Heavy Duty. Works on brake drums with or without an anchor pin. Note: S...

Description Black. Strong ABS plastic. Clamps to workbench; tool tray or anything that is made of metal and at the same time holds sockets firmly i...

Description Black. Strong ABS plastic. Clamps to workbench; tool tray or anything that is made of metal and at the same time holds sockets firmly i...