Tools

Description Used to check piston ring condition etc. of gasoline engines. Gauge reads 0-300 PSI and 0-2100 kpa. Fits with large 18mm thread sizes a...

Description Used to clean-up 14mm and 18mm threaded spark plug and oxygen sensor threads. Double ended. Use with a regular 13/16" or 21mm spark plu...

Description Translucent (see-through) oil dispenser; With detachable and flexible 8" (20cm) spout / funnel; Capacity 6 quarts (5.6 liter); Marked w...

Description Translucent (see-through) oil dispenser. With detachable and flexible 8" (20cm) spout / funnel. Capacity 6 quarts (5.6 liter); Marked w...

Description For 2 1/8" to 5" (54mm to 127mm) pistons; locking action without ratchet issues; 3 1/2" high Product Details Brand: Lisle Category: ...

Description With free fingers & thumb. Double wall construction. Overall length 17" (45cm). An arm glove is used to prevent burns from hot engi...

Description Used to install and remove flat band clamp sizes; as commonly used on fuel lines. With adjustable screw-in / screw-out tips to acommoda...

Description ALDL; Pack-on and weather connectors. Works for assortment of wiring harness style receptacle pins. Designed for automotive use; but wo...

Description Double ended for pull or push action to disengage a variation of electrical connectors. Fitment Universal Product Details Brand: Lisl...

Description Dual drive. 3/8" for use with rachet for installing & removing and 1/2" for use with a breaker bar for loosening stuck sensors Prod...

Description 3/8" drive. Used restore / clean 18mm oxygen sensor threads. Note: Not suitable for cutting new threads. Fitment 06-09 Touring; 06-11 D...

Description Used to remove oxygen sensors with 22mm. With cutaway clot for wiring Product Details Brand: Lisle Category: TOOLS Unit: 1 Product...

Description Large. With 4 chuck drives 17.4mm; 19.2mm; 21.5mm and 28.5mm. Universally used on drills and these will not get lost. Comes with neodym...

Description Small. With 4 chuck drives 12.4mm; 14.9mm; 15.9mm and 16.2mm. Universally used on drills and these will not get lost. Comes with neodym...

Description Used to clean-cut small and large water; oil and fuel hose up to 1 1/4" (31mm) diameter. Overall length 24cm. Note: See 530860 for repl...

Description Used to install and remove brake shoe springs in braks drums. Double ended tool. 12 3/4" long. Product Details Brand: Lisle Category...

Description By using controlled pressure it is possible to use just one stone grit for polishing and honing. Stones are square end to hone to the e...

Description For 530700 brake caliper hone Product Details Brand: Lisle Category: TOOLS Unit: 1 Product code: 530772

Description For 530770 brake cylinder hone Product Details Brand: Lisle Category: TOOLS Unit: 1 Product code: 530771

Description Controlled pressure makes it possible to polish or hone with just one stone grit. Square ends of stones hone to the end in step-cut and...

Description A ergonomic design creeper seat with 4 castor wheels (360 degree rotating wheels) for unrivaled maneuverability. When tilted forward th...

Description 5-piece set. Used to wrench-off oil hoses; moldings; clips; clamps; seals; o-rings; cotter pins; gaskets etc. Comes with long and short...

Description Used to check vacuum operated components like V.O.E.S.; vacuum petcocks and more Product Details Brand: Lisle Category: TOOLS Unit:...

Description 1/2" drive. Will extract but also insert studs. With two holes; optimizing fit for minimal thread scoring. Suitable for 6mm to 19mm stu...