Touring

DescriptionEvolution-Style Aluminium CylindersStock replacement cylinders, 3.5" bore with cast-iron linerFor 80" or 89" enginesMade in the U.S.A.De...

DescriptionAir Cleaner CoverInstallation of an S&S air cleaner may require re-jetting or engine re-tuning, however tuning within the OEM emissi...

DescriptionDual-Cable Throttle Assembly KitEach kit includes a two-cable throttle assembly with matching grips, throttle sleeve, OEM-style throttle...

DescriptionCam Installation KitKits include all required parts needed when servicing or changing gear- or chain-drive cams in a Twin Cam motorMade ...

DescriptionAdjustable Pushrods.4375" diameter chromoly steel for maximum strengthRocker boxes must be removed for installation or removalMade in th...

DescriptionSuper Stock™ Engine CaseCast from A356 T-6 heat-treated aluminium alloyMachined to accept an oil filter assembly that mounts on the fron...

DescriptionOil Pump Components for Evo Big TwinHardware, check balls, retainers, etc. are available for Big Twin oil pumpsDetailsUnits : EachProduc...

DescriptionHeavy-Duty Connecting Rod SetsHigh-quality, heavy duty rod sets come complete and ready to installSet includes front and rear rods, cran...

DescriptionSuper E and G Shorty Carburettor KitSuper E has a 1-7/8" throat at the butterfly and a 1-9/16" venturi and is recommended for use on Big...

DescriptionRing Set for S&S PistonsReplacement ring set for S&S PistonsDetailsBore Size : 4,000"Piston Size : +0,010"Product Name : Piston ...

DescriptionRing Set for S&S PistonsReplacement ring set for S&S PistonsDetailsPiston Size Imperial : +0.020"Units : SetBore Size : 3,645"Pi...

DescriptionRing Set for S&S PistonsReplacement ring set for S&S PistonsDetailsUnits : SetBore Size : 3,635"Piston Size : +0,010"Piston Size...

DescriptionGasket KitMade in the U.S.A.DetailsUnits : KitProduct Name : Gasket KitType : Top EndBore Size : 4,125"FitmentHarley-Davidson FLH 1340 E...

DescriptionGasket KitMade in the U.S.A.DetailsBore Size : 4,000"Product Name : Gasket KitFeatures : For '99 - '06 Super Stock S&S Twin CamType ...

DescriptionGasket KitMade in the U.S.A.DetailsFeatures : For '99 - '06 Super Stock S&S Twin CamProduct Name : Gasket KitBore Size : 3,875"Type ...

DescriptionGasket KitMade in the U.S.A.DetailsFeatures : For '84 - '99 Super Stock S&S Evolution Big TwinProduct Name : Gasket KitUnits : KitBo...

DescriptionTop End Gasket KitIncludes set of head and base gaskets, exhaust gaskets and O-ringsLayered steel head gasketsMade in the U.S.A.Kit does...

DescriptionChrome Rocker BoxesPositive O-ring seal ensures leak-free operationCan be installed with the stock engine in the frame in most applicati...

DescriptionIntelligent Spark Technology (IST) Ignition System SensorThe S&S system makes use of crank position sensor, cam position sensor if p...

DescriptionEngine StandAn economical way to hold an engine on the work bench, for shipping, or for displayProfessional appearance suitable for disp...

DescriptionReplacement High Volume/High Pressure Polished Billet Oil Pump Gasket KitMade in the U.S.A.DetailsProduct Name : GasketUnits : KitType :...

DescriptionLower End Gasket KitContain the best quality gaskets availableMade in the U.S.A.DetailsProduct Name : Gasket KitType : Lower EndBore Siz...

DescriptionLower End Gasket KitContain the best quality gaskets availableMade in the U.S.A.For S&S Super Stock '92 - '99 Evolution-Style Big Tw...

DescriptionReplacement Piston RingsReplacement piston rings for 106" applicationsReplacement Ring Sets for S&S Pistons OnlyDetailsProduct Name ...

Description106" Piston KitThese forged 3-7/8" bore stroker pistons for 1999-'16 HD® Big Twin are required for the S&S 106" stock bore stroker k...

Description106" Piston KitThese forged 3-7/8" bore stroker pistons for 1999-'16 HD® Big Twin are required for the S&S 106" stock bore stroker k...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsWidth : 28,6 mm (1-1/8")Product Name : BeltType : Rea...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsProduct Name : BeltTooth Count : 128Material : X3N Ca...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsMaterial : X3N CarbonProduct Name : BeltTooth Count :...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsProduct Name : BeltUnits : EachTooth Count : 135Width...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsMaterial : X3N CarbonProduct Name : BeltUnits : EachT...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsTooth Count : 130Material : X3N CarbonProduct Name : ...

DescriptionHigh Strength Final Drive BeltMade of super-strong Gates Carbon X3N materialDetailsMaterial : X3N CarbonTooth Count : 128Units : EachWid...

DescriptionInner Primary Mainshaft Bearing RaceEliminates bearing race movement that can cause costly damage to transmission seal and output bearin...

DescriptionIntake FlangeDesigned specifically for S&S intake manifoldsMade in the U.S.A.DetailsColour/Finish : RawMaterial : AluminiumProduct N...

DescriptionIntake FlangeDesigned specifically for S&S intake manifoldsMade in the U.S.A.DetailsModel : FType : O-RingMaterial : AluminiumBase F...

DescriptionIntake ManifoldS&S Style ManifoldsThey have an extra vacuum nipple to accommodate both the VOES and special S&S 4-1/8" bore brea...

DescriptionSpigot-Mount Intake ManifoldUsed to install a stock CV carburettor on S&S 3.625", 4" and 4.125" bore motorsWill also fit S&S Hot...

DescriptionSpigot-Mount Intake ManifoldUsed to install a stock CV carburettor on S&S 3.625", 4" and 4.125" bore motorsWill also fit S&S Hot...

DescriptionSingle-Bore ManifoldDesigned for riders seeking the greatest possible performance gains from their fuel-injected enginesFor maximum tuna...

DescriptionSingle-Bore ManifoldDesigned for riders seeking the greatest possible performance gains from their fuel-injected enginesFor maximum tuna...

DescriptionIntake Manifold FlangeReplacement seals also availableMade in the U.S.A.DetailsType : FlangeProduct Name : Intake ManifoldUnits : PairCo...

DescriptionFlange-Mount Intake ManifoldCan be used to replace stock "compliance fitting" manifold on 84-89 and stock rigid-mount manifold from 90-9...

DescriptionFlange Mount Intake ManifoldFor mounting an S&S E and G series carburettor or flange mount carburettor on a 99-06 Twin Cam motor wit...

DescriptionIdle Air Control Motor KitFor single bore throttle bodiesFor idle air control motor SS EFI with hardware, 1995-'05.DetailsBase Colour : ...

DescriptionSingle-bore Throttle Body And ManifoldDesigned for riders seeking the greatest possible performance gains from their fuel-injected engin...

Description70mm Induction KitInclude a 70mm S&S Throttle Hog throttle body and all components needed for installation on the 143" engineS&S...

DescriptionStealth Air Cleaner CoverFit the S&S Stealth air cleaner kitsMade in the U.S.A.DetailsMaterial : Die CastModel : StealthType : Air C...