Jim's

DescriptionJims, Superflex battery cable setDetailsPerformance battery cables with 1666 individual cable strands for extreme flexibility. Lugs are ...

DescriptionJims, Superflex battery cable setDetailsPerformance battery cables with 1666 individual cable strands for extreme flexibility. Lugs are ...

DescriptionJIMS, SUPPORT SHIFTER CAM. BILLET (LEFT)DetailsBillet aluminum replacement for 33326-79A shifter cam. Includes 507680 (OEM style 9115) b...

DescriptionJIMS, surface temperature stripsDetailsStrips will change color when the part has reached 210°F (99°C). These heat strip stickers are us...

DescriptionJIMS, swingarm bearing install toolDetailsSwingarm bearings must be installed and aligned accurately for good handling. Both drive side ...

DescriptionJIMS, tappet adjustment toolDetailsUsed to check correct free play on the hydraulic tappet. Insert the tip under the hydraulic unit reta...

DescriptionJIMS, tappet bleed toolDetailsA special jar will hold four hydraulic tappets. Once vacuum has been applied the lifters will fully bleed-...

DescriptionJIMS, tappet block and Powerglide tappet kit. PolishedDetailsThis kit has a 3/8" lower seat for the pushrods, reducing the pushrod to ta...

DescriptionJIMS, tappet block and Powerglide tappet kit. PolishedDetailsIncludes a set of two 7075-T651 polished billet tappet guides and a set of ...

DescriptionJIMS, tappet block clearance cutter toolDetailsUsed to provide clearance for high lift cams84-99 Evo B.T.; 86-90 XL

DescriptionJIMS, TAPPET BLOCK PULLER TOOLDetailsUsed to remove the press-fitted tappet blocks from the right side of the Sportster crankcase.57-78 XL

DescriptionJIMS, tappet holding toolDetailsBlue anodized aluminum. With laser etched tappet locations. Used to store the tappets and anti-rotation ...

DescriptionJIMS, tappet oil screen/pump plug screw toolDetailsUsed to remove & install OEM style slotted oil pump and tappet screen plugs with ...

DescriptionJIMS, tappet pump test standDetailsUsed to check for loose or spongy feeling tappets, with pressurized oil, prior to installing. Easy to...

DescriptionJIMS, TC cam relief tool. Dual spindlesDetailsDual spindle; Used to machine cases for high lift cams99-06 Twin Cam (excl. 2006 Dyna)

DescriptionJIMS, TC cam relief tool. Single spindleDetailsSingle spindle; Used to machine cases for high lift cams; Note: This tool has one spind...

DescriptionJIMS, TCB crankcase support block toolDetailsAluminum with delring insert to help prevent marring; supports case underneath balancer bea...

DescriptionJIMS, thread chaser tap setDetailsIncludes 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13 and 9/16-12. Zinc plated, made from 1027 steel and i...

DescriptionJIMS, Timken bearing simulator toolDetailsUsed to allow easy removal and replacement of the flywheel assembly in the left crankcase when...

DescriptionJIMS, top center case bolt facer toolDetailsUsed to spot face the center right case of big bore engines, so the bolt head will seat flat...

DescriptionJIMS, Touring fork stem nut wrenchDetailsUsed to access and make adjustments to the 45718-60 1-1/2" x 1.5 x 0.47" fork stem nut on Touri...

DescriptionJIMS, transm. main bearing installer toolDetailsUsed to install the main transm. case bearing OEM 8967/A by using hand tools. Tool will ...

DescriptionJIMS, transm. maindrive gear bearing toolDetailsUsed to install maindrive gear bearing OEM 8905 (L77-81 4-sp B.T.) or OEM 8906 (82-86 4-...

DescriptionJIMS, TRANSM. PULLEY KIT 32TDetailsINCL. SEALS/SPACER/MEGA-NUT85-06 SOFTAIL, FLT; 85-05 DYNA